CURRENTLY SOLD OUT
 | Shop by category |
{"delay":300}
|
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in USB Bluetooth Adapters/Dongles
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on USB Bluetooth Adapters/Dongles
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
This is a simple device that can send an audio stream from any 3.5 mm audio socket. It is simple to operate and is reliable. For a purely audio device like a radio , it is a cheap reliable solution. If you want to use it on a smart TV as I did, you can plug it into the headphone socket and a USB socket and it will take care of it's own charging. However, it introduces a time lag in the audio, which results in a lip sync issue. It has a good range and can be used anywhere in my 10 metre lounge. It works beautifully for podcasts on my IPad. All in all good value if the delay is not an issue for you.
Verified purchase: Yes | Condition: New
It works with Jabra Move heaphones, but not with Jabra Revo headphones, which is the one I bought it for. The Revo headphones keep asking me to change settings on my bluetooth device, but there are no settings to change on this transmitter. The Revo works fine with my phone, so its all a bit inconclusive. Fact is, I cannot use my Revo headphones with my PC, which was the original purpose for buying the transmitter. Quality of box, connectors, etc. are fine
Verified purchase: Yes | Condition: New
Make sure the Bluetooth headset or any other Bluetooth device you are transmitting to is a2db compatible. Took longer than expected to pair as my headset was not a2db compatible. Paired to my other headset which was a2db compatible. Lip sync is out 1-2sec however I can live with it. Can't complain as it's cheap and cheerful
Verified purchase: Yes | Condition: New
This little product is works great, simple to install and is the perfect item for use with my tv. Highly recommended.
Verified purchase: Yes | Condition: New
The transmitter does what it is supposed to do which in my case transmits a signal from a TV to bluetooth earphones. There are two main problems. Battery use is limited to approx 3 hours then a recharge is required The recharge cable connection(cable to transmitter)is "dodgy" and requires a bit of sideways pressure before the recharge light comes on I do this with the aid of an elastic band. The instruction font is minute and requires a magnifying glass to read them. The pairing process seems(according to the instructions)complicated but in reality is very simple.
Verified purchase: Yes | Condition: New
