Vice is quite rough with poor movement in either axis as when adjusted there's a bit of play in the movement. If you then tighten the play it's very difficult to slide. I wouldn't recommend it. If you want a decent cross sliding vice look elsewhere.
Verified purchase: Yes | Condition: New
Useful bit of kit for general use, especially on a wood lathe and with shims/slides tightened, but too much play in the threaded spindles for accurate work.
Verified purchase: Yes | Condition: New
Very good value. Suitable for light milling, drilling etc
Verified purchase: Yes | Condition: New
Verified purchase: Yes | Condition: New
Well made for accurate work
Verified purchase: Yes | Condition: New