This is the second time I have used this type of awning rail and it is great! A HINT and My advise is to tape it on where you want it to be fitted and drill the holes into the van body before you remove the sticky tape cover. I then removed the rail and the sticky backing added a strong sealant and then applied the rail back to the van and screwed it into place.I'm not saying the double sided sticky tape is not good but I wouldn't trust it to prevent water getting to the holes drilled into mild steel and causing rust to form under the rail!
Verified purchase: Yes | Condition: New
Rails is really good looking and has sticking tape on the back. The supplied self tapping screws are useless. Had to go to pro diy shop and spend £5 on new decent screws
Verified purchase: Yes | Condition: New
I would echo the sentiments of others on here that the rail itself is very good but the screws are a waste of time. The 2 supplied drill bits were a nice touch and I used them to pilot drill for the stainless steel self taping screws I got from tool. station. Over all a bargain.= so much so I bought a 2nd set as my awning turned out to be longer than 3.6m.
Verified purchase: Yes | Condition: New
The finish on the extrusion was better than expexted. However the screws that are provided are of very poor quality. They appear to be no more than mild steel ? I gave up with them after shearing the heads of three of them, brought 1 size up stainless steel self tappers. Used a good quality high speed bit, and a properly set up power driver. I all so used Gorrila glue as a belt and braces fixing No more problems.
Verified purchase: Yes | Condition: New
It is very well made channel. After looking at other reviews, which said the screws supplied are no good, i have to agree, so i used my own screws. Apart from the screws, i think it is a great piece of kit, and they also provide two drill bits.
Verified purchase: Yes | Condition: New