Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Stands & Hangers
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Stands & Hangers
These will do the job. I suggest you screw together using something to lock threads,an adhesive of some type as the can slacken easily.Also,if you need to adjust the width of the fingers to suit your guitar,it's best to do it by squeezing them together before screwing to the wall.
Verified purchase: Yes | Condition: New
I don't recommend buying these as they arre sold without wall mounting screws and plugs or recommendations on how to fit them, you'll end up drilling holes into your plaster drywall and making a mess. So you try to make some room and keep your place tidy, but all you end up with is tools and debris drill bits and guitars, furniture and ladders scattered about all over the place. 150% worse than you were before. Do what I did when I was 17, get a wire coat hanger , wrap around the neck, put some insulated tape around it. Find a very long nail and hammer it into the wall,. Save yourself buying these stupid things. Not only that, but they don't fit, the claws are too wide. And the folk who sell them can't be bothered helping either. No no no no no no no.
Verified purchase: Yes | Condition: New
Can't complain for the price, however... it's worth noting that the back plate is very thin and I found that it didn't take much downward force at all on the guitar to cause the plate to bend and therefore for the bracket to sag. If using with a none acoustic guitar (as I am) the bracket holds the guitar quite a way out from the wall (I guess as would be necessary for an acoustic guitar with its deeper body) - I cut the main strut down and tapped a new thread into it, which not only holds the guitar closer to the wall, but reduces the leverage and lessens the bending back plate issue.
Verified purchase: Yes | Condition: New
it stviks out way way too much whens its on the wall hense the guitar also sticks out way too far its constantly getting knocked and i worry it will one day be knocked clean off the wall its not a good idea its not practical , my advise buy one thats shorter
Verified purchase: Yes | Condition: New
It's a nice solid mount that'll hold the guitar on the wall, my only criticism is that the bolt that attaches to the plate stands proud, so you have to make a shallow hole in the wall to allow for this when screwing it to the wall.
Verified purchase: Yes | Condition: New